Product Description

Improve the strength and performance of your printed resins by post-curing with the new 120V 2nd Generation Form Cure. This updated machine combines heat and 405 nm light for consistent prints. With its new technologies, curing cycles now take as little as one minute. 

After printing and washing, place your parts in the Form Cure chamber, close the door, and select the resin type you are working with. The machine will automatically take care of the rest, curing the specified material at the correct temperature and for the ideal amount of time. Advanced users can adjust the curing cycle to make sure complex parts turn out perfectly, and save their custom settings for future use.

Please Note: Biocompatible materials must be post-cured to meet regulatory safety standards.

Specifications

Compatibility

• Compatible Printers: Form 4, Form 4B, Form 3, Form 3B, Form 2
• Connectivity: USB (rev 2.0) B port with a USB-C cable

Equipment Specs

• Product Dimensions: 33.7 × 35.6 × 40.4 cm (13.3 × 14.0 × 15.9 in)
• Product Weight: 12.1 kg (26.7 lb)
• Turntable Diameter: 23.5 cm (9.25 in)
• Chamber Volume (W × D × H): 25.0 × 25.0 × 26.5 cm (9.84 × 9.84 × 10.43 in)
• Maximum Part Dimensions (W × D × H): 20.0 × 12.5 × 24.5 cm (7.87 × 4.92 × 9.64 in)
• Operating Environment: 18–28 ºC (64–82 ºF)
• Maximum Post-Cure Temperature: 100 ºC (212 ºF)
• Light Source: 48 multi-directional LEDs
• LED Electrical Power: 150 W
• LED Radiant Power (Total): 50 W
• LED Wavelength: 405 nm
• Sound Emission: Does not exceed 70 dB(A)
• Power Requirements:
  Input (NA) 100-120 V
  VAC, 50-60 Hz, 15 A
  Input (EU) 220 - 240 V
  VAC, 50-60 Hz, 8 A